 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| CHENMKO ENTERPRISE CO.,LTD GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR VOLTAGE-6.8 TO 200 VOLTS 1500 WATTS PEAK POWER 6.5 WATTS STEADY STATE FEATURES * * * * * * Plastic package 1500W surge capability at 1ms Glass passivated chip junction in SMC Package Excellent clamping capability Low Zener lmpedance Fast response time: typically less than 1.0ps from 0 volts to BV min. * Typical IR less than 1 uA above 10V * High temperature soldering guaranteed : 260oC/10 seconds at terminals 1.5SCMJ SERIES SMC 0.245(6.22) 0.220(5.59) 0.125(3.17) 0.115(2.92) (2) 0.280(7.11) 0.260(6.60) 0.012(0.305) 0.006(0.152) MECHANICAL DATA Case: JEDEC SMC molded plastic Terminals: Plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight: 0.007 ounce 0.25 gram (1) 0.103(2.62) 0.079(2.06) 0.060(1.52) 0.030(0.76) 0.008(0.203)(max) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25oC ambient temperature unless otherwise specified. Single phase, half wave, 60 HZ, resistive or inductive load. For capacitive load, derate current by 20%. 0.320(8.13) 0.305(7.75) Dimensions in inches and (millimeters) SMC DEVICES FOR BIDIRECTIONAL APPLICATIONS For Bidirectional use C or CA Suffix for types 1.5SCMJ6.8A thru types 1.5SCMJ200A Electrical characteristics apply in both directions. MAXIMUM RATINGES ( At TA = 25oC unless otherwise noted ) RATINGS SYMBOL VALUE UNITS Peak Power Dissipation at TA = 25oC, Tp = 1ms ( Note1 ) PPK Minimum 1500 Watts Steady State Power Dissipation at TL = 75oC PD 6.5 Watts Peak Forward Surge Current 8.3ms Single Half Sine-Wave Superimposed on Rated Load ( Note 2 ) IFSM 200 Amps Operating and Storage Temperature Range TJ, TSTG -65 to +175 o C NOTES : 1. Non-repetitive current pulse, per Fig. 3 and derated above TA = 25oC per Fig. 2. 2. 8.3ms single half sine-wave, duty cycle = 4 pulses per minute maximum. 3. P.C.B. mounted 0.31 x 0.31" ( 8 x 8mm) copper pad areas 2003-01 Breakdown Voltage PRODUCT NO. VBR Volts ( NOTE 1 ) MIN. 1.5SCMJ6.8APT 1.5SCMJ7.5APT 1.5SCMJ8.2APT 1.5SCMJ9.1APT 1.5SCMJ10APT 1.5SCMJ11APT 1.5SCMJ12APT 1.5SCMJ13APT 1.5SCMJ15APT 1.5SCMJ16APT 1.5SCMJ18APT 1.5SCMJ20APT 1.5SCMJ22APT 1.5SCMJ24APT 1.5SCMJ27APT 1.5SCMJ30APT 1.5SCMJ33APT 1.5SCMJ36APT 1.5SCMJ39APT 1.5SCMJ43APT 1.5SCMJ47APT 1.5SCMJ51APT 1.5SCMJ56APT 1.5SCMJ62APT 1.5SCMJ68APT 1.5SCMJ75APT 1.5SCMJ82APT 1.5SCMJ91APT 1.5SCMJ100APT 1.5SCMJ110APT 1.5SCMJ120APT 1.5SCMJ130APT 1.5SCMJ150APT 1.5SCMJ160APT 1.5SCMJ170APT 1.5SCMJ180APT 1.5SCMJ200APT @ IT ( mA ) MAX. 7.14 7.88 8.61 9.55 10.5 11.6 12.6 13.7 15.8 16.8 18.9 21.0 23.1 25.2 28.4 31.5 34.7 37.8 41.0 45.2 49.4 53.6 58.8 65.1 71.4 78.8 86.1 95.5 105 116 126 137 158 168 179 189 210 10 10 10 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 Working Peak Reverse Voltage Maximum Reverse Leakage at Vrwm Maximum Reverse Current ( NOTE 2 ) Maximum Reverse Voltage at Irsm ( clamping ) Vrsm ( V ) 10.5 11.3 12.1 13.4 14.5 15.6 16.7 18.2 21.2 22.5 25.2 27.7 30.6 33.2 37.5 41.4 45.7 49.9 53.9 59.3 64.8 70.1 77.0 85.0 92.0 103 113 125 137 152 165 179 207 219 234 246 274 Maximum Temperature Coefficient of Vbr NOM. 6.8 7.5 8.2 9.1 10 11 12 13 15 16 18 20 22 24 27 30 33 36 39 43 47 51 56 62 68 75 82 91 100 110 120 130 150 160 170 180 200 Vrwm ( V ) 5.80 6.40 7.02 7.78 8.55 9.40 10.2 11.1 12.8 13.6 15.3 17.1 18.8 20.5 23.1 25.6 28.2 30.8 33.3 36.8 40.2 43.6 47.8 53.0 58.0 64.1 70.1 77.8 85.5 94.0 102 111 128 136 145 154 171 Ir ( uA ) 1000 500 200 50 10 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 Irsm ( A ) 143 132 124 112 103 96.0 90.0 82.0 71.0 67.0 59.5 54.0 49.0 45.0 40.0 36.0 33.0 30.0 28.0 25.3 23.2 21.4 19.5 17.7 16.3 14.6 13.3 12.0 11.0 9.9 9.1 8.4 7.2 6.8 6.4 6.1 5.5 ( %C ) 0.057 0.061 0.065 0.068 0.073 0.075 0.078 0.081 0.084 0.086 0.088 0.090 0.092 0.094 0.096 0.097 0.098 0.099 0.100 0.101 0.101 0.102 0.103 0.104 0.104 0.105 0.105 0.106 0.106 0.107 0.107 0.107 0.108 0.108 0.108 0.108 0.108 6.45 7.13 7.79 8.65 9.5 10.5 11.4 12.4 14.3 15.2 17.1 19.0 20.9 22.8 25.7 28.5 31.4 34.2 37.1 40.9 44.7 48.5 53.2 58.9 64.6 71.3 77.9 86.5 95.0 105 114 124 143 152 162 171 190 RATING CHARACTERISTIC CURVES ( 1.5SCMJ6.8APT ~ 1.5SCMJ200APT ) PEAK PULSE POWER (PPP) OR CURRENT (IPP) DERATING IN PERCENTAGE,% FIG. 1 - PULSE POWER RATING CURVE PPPM, PEAK PULSE POWER, KW 100 Non-Repetitive Pulse Waveform Shown in Fig.3 TA = 25 OC FIG. 2 - PULSE DERATING CURVE 100 75 10 50 1.0 25 0.1 0.1uS 0 0 25 75 50 100 125 150 175 TA, AMBIENT TEMPERATURE,( OC) 200 1.0uS 10uS 100uS 1.0mS TP, PULSE WIDTH, Sec 10mS FIG. 3 - PULSE WAVEFORM 150 tr = 10usec. Pulse Width (td) is Defined as the Point Where the Peak Current Decays to 50% of IPPM FIG. 4 - TYPICAL JUNCTION CAPACITANCE 10000 Unidirectional----- IPPM, PEAK PULSE CURRENT,% CJ, CAPACITANCE, pF Peak Value IPPM VR = 0 100 IPPM HALF VALUE 2 10/1000usec. Waveform as Defined by R.E.A. 1000 50 100 f = 1MH Vsig = 50mVp-p TJ = 25 OC VR = RATED STAND-OFF VOLTAGE 0 0 1.0 2.0 t, TIME,mS 3.0 4.0 10 5 10 100 V(BR), BREAKDOWN VOLTACE, VOLTS 500 FIG. 5 - STEADY STATE POWER DERATING CURVE PM(AV), STEADY STATE POWER DISSIATION, WATTS 8.0 60Hz Resistive or Inductive Load FIG. 6 - MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT UNIDIRECTIONAL 200 AMPERES PEAK FORWARD SURGE CURRENT 8.3ms Single Half Sine-Wave (JEDED Method) TJ = TJ max. 6.0 40 20 10 4.0 2.0 0 0 0 25 50 75 100 125 150 TL, LEAD TEMPERATURE ( OC) 175 200 1 10 NUMBER OF CYCLES AT 60 Hz 100 RATING CHARACTERISTIC CURVES (1.5SCMJ6.8APT ~ 1.5SCMJ200APT ) FIG. 7 - INCREMENTAL CLAMPING VOLTAGE CURVE UNI-DIRECTIONAL 100 Waveform 8X20 Impulse Vc = Vc-V(BR) 1.5SCMJ200A 1.5SCMJ130A 1.5SCMJ100A VC, INCREMENTAL CLAMPING VOLTAGE VC, INCREMENTAL CLAMPING VOLTAGE FIG. 8 - INCREMENTAL CLAMPING VOLTAGE CURVE UNI-DIRECTIONAL 100 Waveform 10X1000 Impulse Vc = Vc-V(BR) 1.5SCMJ200A 1.5SCMJ130A 1.5SCMJ75A 20 10 20 10 1.5SCMJ75 1.5SCMJ39A 2.0 1.0 1.5SCMJ39A 1.5SCMJ33A 1.5SCMJ6.8A 1.5SCMJ9.1A 1.5SCMJ18A 1.5SCMJ12A 2.0 1.0 1.5SCMJ33A 1.5SCMJ6.8A 1.5SCMJ9.1A 0.2 0.1 0.5 1 2.0 10 20 IPP, PEAK PULSE CURRENT, AMPS 50 0.2 0.1 0.5 1 2.0 10 20 IPP, PEAK PULSE CURRENT, AMPS 50 FIG. 9 -INSTANTANEOUS FORWARD VOLTAGE CHARACTERISTICS CURVE 100 KV-TEMPERATURE COEFFICIENT-mV/J 1000 FIG. 10 - BREAKDOWN VOLTAGE TEMPEATURE COEFFICIENT CURVE FORWARD CURRENT 10 Pulse Width = 300uS 1% Duty Cycle TJ = 25 OC 100 Uni-directional 1 10 0.1 0 0.4 0.8 1.2 1.6 2.0 INSTANTANEOUS FORWARD CURRENT, AMPERES 1 5 10 20 50 100 200 V(BR), BREAKDOWN VOLTAGE, VOLTS 500 |
Price & Availability of 15SCMJ110APT
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |